Reference Guide

108 | Data Center Bridging
www.dell.com | support.dell.com
show interface pfc statistics
Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax
show interface port-type slot/port pfc statistics
Parameters
Command Mode
EXEC Privilege
Command
History
Example
Figure 7-8. show interfaces pfc statistics Command Example
show stack-unit stack-ports ets details
Displays the ETS configuration applied to egress traffic on stacked ports, including ETS operational
mode on each unit and the configurated priority groups with dot1p priorities, bandwidth allocation, and
scheduler type.
Syntax
show stack-unit {all | stack-unit} stack-ports all ets details
Parameters
Command Mode
EXEC Privilege
Output Appln Priority
TLV pkts
Number of Application Priority TLVs transmitted.
Error Appln Priority TLV
pkts
Number of Application Priority error packets received.
Table 7-3. show interfaces pfc summary Command Example Fields (continued)
Field Description
port-type Enter the port type.
slot/port Enter the slot/port number.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show interface tengigabitethernet 0/3 pfc statistics
Interface TenGigabitEthernet 0/3
Priority Rx XOFF Frames Rx Total Frames Tx Total Frames
-------------------------------------------------------------------------------
0 0 0 0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
stack-unit
Enter the stack unit identification. Valid values: 0 to 5.