Reference Guide

Data Center Bridging | 107
Remote is enabled,
Priority list,
Remote Willing Status is
enabled
Remote Admin mode: (enabled if a valid TLV was received or disabled)
Priority list: list of the configured PFC priorities (if any).
Remote Willing Status: Willing bit received in PFC TLVs from the remote peer.
Local is enabled Local PFC configuration including the mode and the list of PFC priorities
configured.
Operational status (local
port)
Port state for current operational PFC configuration:
• Init: Local PFC configuration parameters were exchanged with the peer.
• Recommend: Remote PFC configuration parameters were received from the
peer.
• Internally propagated: PFC configuration parameters were received from the
configuration source.
PFC DCBX Oper status Operational status for the exchange of the PFC configuration on the local port:
match (up) or mismatch (down).
State Machine Type Type of state machine used for DCBX exchanges of the PFC parameters:
Feature - for legacy DCBX versions; Symmetric - for an IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV:
FCOE TLV Tx Status
Status of FCoE advertisements in application priority TLVs from the local DCBX
port: enabled or disabled.
Application Priority TLV:
SCSI TLV Tx Status
Status of ISCSI advertisements in application priority TLVs from the local DCBX
port: enabled or disabled.
Application Priority TLV:
Local FCOE Priority Map
Priority bitmap used by the local DCBX port in FCoE advertisements in application
priority TLVs.
Application Priority TLV:
Local ISCSI Priority Map
Priority bitmap used by the local DCBX port in ISCSI advertisements in application
priority TLVs.
Application Priority TLV:
Remote FCOE Priority
Map
Priority bitmap received from the remote DCBX port in FCoE advertisements in
application priority TLVs.
Application Priority TLV:
Remote ISCSI Priority
Map
Priority bitmap received from the remote DCBX port in iSCSI advertisements in
application priority TLVs.
PFC TLV Statistics: Input
TLV pkts
Number of PFC TLVs received.
PFC TLV Statistics:
Output TLV pkts
Number of PFC TLVs transmitted.
PFC TLV Statistics: Error
pkts
Number of PFC error packets received.
PFC TLV Statistics: Pause
Tx pkts
Number of PFC pause frames transmitted.
PFC TLV Statistics: Pause
Rx pkts
Number of PFC pause frames received.
Input Appln Priority TLV
pkts
Number of Application Priority TLVs received.
Table 7-3. show interfaces pfc summary Command Example Fields (continued)
Field Description