Reference Guide

106 | Data Center Bridging
www.dell.com | support.dell.com
show interface pfc
Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link
delay.
Syntax
show interface port-type slot/port pfc {summary | detail}
Parameters
Command Mode
EXEC Privilege
Command
History
Example
Figure 7-7. show interface pfc detail Command Example
Usage
Information
Table 7-3 lists the show interface pfc summary field descriptions.
port-type slot/port
pfc
Enter the port-type slot and port PFC information.
{summary | detail} Enter the keyword summary for a summary list of results or enter the keyword detail
for a full list of results.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS# show interfaces tengigabitethernet 0/49 pfc detail
Interface TenGigabitEthernet 0/49
Admin mode is on
Admin is enabled
Remote is enabled
Remote Willing Status is enabled
Local is enabled
Oper status is recommended
PFC DCBX Oper status is Up
State Machine Type is Feature
TLV Tx Status is enabled
PFC Link Delay 45556 pause quanta
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
0 Input TLV pkts, 1 Output TLV pkts, 0 Error pkts, 0 Pause Tx pkts, 0 Pause
Rx pkts
0 Input Appln Priority TLV pkts, 1 Output Appln Priority TLV pkts, 0 Error
Appln Priority TLV Pkts
Table 7-3. show interfaces pfc summary Command Example Fields
Field Description
Interface Interface type with stack-unit and port number.
Admin mode is on
Admin is enabled
PFC mode: on or off.
Priority list: list of the configured PFC priorities (if any).
When the PFC admin mode is on, PFC advertisements are enabled to be sent and
received from peers.