Reference Guide

Data Center Bridging | 101
show interface dcbx detail
Displays the DCBX configuration on an interface.
Syntax
show interface port-type slot/port dcbx detail
Parameters
Command Mode
EXEC Privilege
Command
History
Example
Figure 7-5. show interface dcbx detail Command Example
port-type Enter the port type.
slot/port Enter the slot/port number.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show int te 0/34 dcbx detail
E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled
R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled
P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled
F-Application priority for FCOE enabled f-Application Priority for FCOE
disabled
I-Application priority for iSCSI enabled i-Application Priority for iSCSI
disabled
-------------------------------------------------------------------------------
-----------
Interface TenGigabitEthernet 0/34
Port Role is Auto-Upstream
DCBX Operational Status is Disabled
Reason: Port Shutdown
Is Configuration Source? FALSE
Local DCBX Compatibility mode is IEEEv2.5
Local DCBX Configured mode is IEEEv2.5
Peer Operating version is Not Detected
Local DCBX TLVs Transmitted: ErPfi
0 Input PFC TLV pkts, 0 Output PFC TLV pkts, 0 Error PFC pkts
0 PFC Pause Tx pkts, 0 Pause Rx pkts
0 Input ETS Conf TLV pkts, 0 Output ETS Conf TLV pkts, 0 Error ETS Conf TLV
pkts
0 Input ETS Reco TLV pkts, 0 Output ETS Reco TLV pkts, 0 Error ETS Reco TLV
pkts
0 Input Appln Priority TLV pkts, 0 Output Appln Priority TLV pkts, 0 Error
Appln Priority TLV pkts
Total DCBx Frames transmitted 0
Total DCBx Frames received 0
Total DCBx Frames errors 0
Total DCBx Frames unrecognized 0
FTOS#