Concept Guide

The show port-channel-flow command returns the egress port identication in a given port-channel if a
valid ow is entered. A mismatched ow error occurs if MAC-based hashing is congured for a Layer 2 interface
and you are trying to display a Layer 3 ow.
The output displays three entries:
• Egress port for unfragmented packets.
• In the event of fragmented packets, the egress port of the rst fragment.
• In the event of fragmented packets, the egress port of the subsequent fragments.
NOTE: In the show port-channel–flow command output, the egress port for an unknown unicast,
multicast, or broadcast trac is not displayed.
272 Link Aggregation Control Protocol (LACP)