Administrator Guide

the unit will be operationally down, except for running
Diagnostics.
Please make sure that stacking/fanout not configured for
Diagnostics execution.
Also reboot/online command is necessary for normal operation
after the offline command is issued.
Proceed with Offline [confirm yes/no]:no
Dell#
Make sure that stacking is not configured for Diagnostics execution. Also, reboot/
online command is necessary for normal operation after the offline command is
issued.
show diag
View diagnostics information.
Syntax
show diag {information | stack-unit number [detail | periodic |
summary] | testcase}
Parameters
information Enter the keyword information to view current diagnostics
information in the system.
stack-unit unit-
id
Enter the keyword stack-unit followed by the unit-id to
display information on a specific stack member. The range is
from 0 to 5.
detail (OPTIONAL) Enter the keyword detail to view detailed
diagnostics information.
summary (OPTIONAL) Enter the keyword summary to view a summary
of the diagnostics information. By default, the summary is
displayed.
testcase Enter the keyword testcase to view the list of all the diag
tests available.
Defaults Summary
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example 1
(show diag
information
Command)
Dell#show diag information
Diag information:
Diag software image version:
8-3-17-36
---------------------------------------------------------------
----
Stack-unit Member 0: Unit diags are terminated (Stackunit
Offline).
Stack-unit Member 1: Not present.
Debugging and Diagnostics
301