Administrator Guide

stack-unit iom-mode
Set the M I/O Aggregator operating mode to VLT mode.
Syntax
stack-unit <unit-number> iom-mode vlt
Parameters
unit number
<0-5>
Enter the number of the member stack unit. The range is
from 0 to 5. The default is 0.
vlt Enable virtual link trunking mode.
Command
Modes
• CONFIGURATION
Command
History
Version 9.2(0.0) Introduced on the DELL Poweredge I/O Aggregator Switch
IO Module.
Usage
Information
This command resets the operating mode to VLT. You must reboot the I/O
Aggregator after using this command.
296
Virtual Link Trunking (VLT)