Administrator Guide

Example
Dell#show monitor session
SessID Source Destination Dir Mode Source
IP Dest IP
------ ------ ----------- --- ----
--------- --------
1 Vl 10 Te 0/8 rx Flow N/
A N/A
Related
Commands
monitor session— creates a session for monitoring.
show running-config monitor session
Displays the running configuration of all monitor sessions or a specific session.
Syntax
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use the show
running-config monitor session command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range
is from 0 to 65535.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The monitoring command is saved in the running configuration at the Monitor
Session mode level and can be restored after a chassis reload.
Example
Dell# show running-config monitor session
!
monitor session 1
source TenGigabitEthernet 0/1 destination TenGigabitEthernet
0/2 direction rx
Related
Commands
monitor session— creates a session for monitoring.
show monitor session— displays a monitor session.
Port Monitoring
227