Administrator Guide

Related
Commands
clear lacp counters—Clears the LACP counters.
show interfaces port-channel—Displays the information on configured Port
Channel groups.
show link-bundle-distribution port-channel
Display the traffic-handling and utilization of the member interfaces of the port channel.
Syntax
show link-bundle-distribution port-channel
Command
Modes
EXEC
EXEC Privilege
Command
History
Version 9.3.0.0 Introduced on the M I/O Aggregator
Usage
Information
The following table describes the output fields of this show command:
Field Description
Link-bundle trigger threshold Threshold value that is the checkpoint,
exceeding which the link bundle is
marked as being overutilized and alarm
is generated
LAG bundle number Number of the LAG bundle
Utilization (In Percent) Traffic usage in percentage of the
packets processed by the port channel
Alarm State Indicates whether an alarm is
generated if overutilization of the port
channel occurred. Possible values are
Active and Inactive
Interface Slot and port number, and the type of
the member interface of the port
channel
Line Protocol Indicates whether the interface is
administratively up or down
Utilization (In Percent) Traffic usage in percentage of the
packets processed by the particular
member interface
Example
Dell#show link-bundle-distribution port-channel
Link-bundle trigger threshold - 60
LAG bundle - 1 Utilization[In Percent] - 0 Alarm
State - Inactive
214
Link Aggregation Control Protocol (LACP)