Administrator Guide

13
iSCSI Optimization
Internet small computer system interface (iSCSI) optimization enables quality-of-service (QoS) treatment
for iSCSI storage traffic on an Aggregator.
NOTE: When iSCSI storage devices are detected on the server-ports, storm-control is disabled on
those ports. When the iSCSI devices are off the ports, storm-control is enabled again.
The following commands are used to verify the iSCSI Optimization feature:
• show iscsi
• show iscsi sessions
• show iscsi sessions detailed
show iscsi
Display the currently configured iSCSI settings.
Syntax
show iscsi
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show iscsi
iSCSI is enabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Dell#
Related
Commands
• show iscsi sessions— displays information on active iSCSI sessions on the
switch.
iSCSI Optimization
205