Administrator Guide

Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
mask (OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a
configured prefix list.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
static (OPTIONAL) Enter the keyword static to view only routes
configured by the
ip route command.
summary (OPTIONAL) Enter the keyword summary.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The following describes the show ip route all command in the following
example.
Field Description
(undefined) Identifies the type of route:
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter area
• N1 = OSPF NSSA external type 1
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
IPv4 Routing
201