Administrator Guide

Dell(conf-mon-sess-1)#
Dell(conf-mon-sess-1)#do show monitor session
SessID Source Destination Dir Mode Source
IP Dest IP
------ ------ ----------- --- ----
--------- --------
1 Te 0/1 Te 0/45 rx Port N/
A N/A
Dell(conf-mon-sess-1)#
show config (INTERFACE mode)
Displays the interface configuration.
Syntax
show config
Command
Modes
INTERFACE
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-if)#show conf
!
interface TenGigabitEthernet 1/7
no ip address
switchport
no shutdown
Dell(conf-if)#
show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (group).
Syntax
show config
Command
Modes
CONFIGURATION INTERFACE (conf-if-range)
Command
History
Version 8.3.17.0 Supported on the MI/O Aggregator.
Example
Dell(conf)#interface range tengigabitethernet 1/1 - 2
Dell(conf-if-range-tengig-1/1-2)#show config
!
interface TenGigabitEthernet 1/1
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 1/2
no ip address
switchport
Interfaces
167