Administrator Guide

Dell#show dcb stack-unit 0 port-set 0
stack-unit 0 port-set 0
DCB Status : Disabled
PFC Port Count : 0 (current), 0 (configured)
PFC Queue Count : 0 (current), 0 (configured)
Dell#
Example
(Enable)
Dell#show dcb stack-unit 0 port-set 0
DCB Status : Disabled
Dell#
Dell#
Dell#conf
Dell(conf)#dcb enable on-next-reload
Dell(conf)#00:02:35: %STKUNIT0-M:CP %DIFFSERV-6-
DCB_ENABLE_CFG_ON_RELOAD:
Global DCB will be enabled on subsequent reload, PFC buffers
will be reserved
for all pfc ports and max loss less queues supported for each
stack unit. For
the pfc-buffering change to take effect, please save the
config and reload the
system.
Dell(conf)#end
Dell#00:02:38: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from
console
Dell#write memory
00:02:41: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-
config to
startup-config in flash by default
Dell#reload
Proceed with reload [confirm yes/no]: yes
syncing disks... done
unmounting file systems...
unmounting /f10/flash (/dev/ld0e)...
unmounting /usr (mfs:31)...
unmounting /lib (mfs:23)...
unmounting /f10 (mfs:20)...
unmounting /tmp (mfs:15)...
unmounting /kern (kernfs)...
unmounting / (/dev/md0a)... done
rebooting...
Dell#show dcb stack-unit 0 port-set 0
stack-unit 0 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
Dell#
Example
(Enable DCB
with Auto-
Detect)
Dell#show dcb stack-unit 0 port-set 0
DCB Status : Disabled
Dell#
Dell#
Dell#conf
Dell(conf)#dcb enable on-next-reload
Dell(conf)#00:02:35: %STKUNIT0-M:CP %DIFFSERV-6-
DCB_ENABLE_CFG_ON_RELOAD:
Global DCB will be enabled on subsequent reload, PFC buffers
will be reserved
for all pfc ports and max loss less queues supported for each
stack unit. For
the pfc-buffering change to take effect, please save the
config and reload the
Data Center Bridging (DCB)
101