Users Guide

Disabling Multicast Flooding
If the switch receives a multicast packet that has an IP address of a group it has not learned (unregistered frame), the switch oods
that packet out of all ports on the VLAN. To disable multicast ooding on all VLAN ports, enter the
no ip igmp snooping ood
command in global conguration mode.
When multicast ooding is disabled, unregistered multicast data trac is forwarded to only multicast router ports on all VLANs. If
there is no multicast router port in a VLAN, unregistered multicast data trac is dropped.
Displaying IGMP Information
Use the show commands from the below table, to display information on IGMP. If you specify a group address or interface:
• Enter a group address in dotted decimal format; for example, 225.0.0.0.
• Enter an interface in one of the following formats: tengigabitethernet slot/port, port-channel port-
channel-number, or vlan vlan-number.
Displaying IGMP Information
Command
Output
show ip igmp
snooping
groups [group-
address
[detail] |
detail |
interface
[group-address
[detail]]
Displays information on IGMP groups.
show ip igmp
snooping
interface
[
interface]
Displays IGMP information on IGMP-enabled interfaces.
show ip igmp
snooping
mrouter [vlan
vlan-number]
Displays information on IGMP-enabled multicast router (mrouter) interfaces.
clear ip igmp
snooping
groups [group-
address
|
interface]
Clears IGMP information for group addresses and IGMP-enabled interfaces.
show ip igmp snooping groups Command Example
Dell# show ip igmp snooping groups
Total Number of Groups: 2
IGMP Connected Group Membership
Group Address Interface Mode Uptime Expires Last Reporter
226.0.0.1 Vlan 1500 INCLUDE 00:00:19 Never 1.1.1.2
226.0.0.1 Vlan 1600 INCLUDE 00:00:02 Never 1.1.1.2
Dell#show ip igmp snooping groups detail
Interface Vlan 1500
Group 226.0.0.1
Uptime 00:00:21
Expires Never
Router mode INCLUDE
Last reporter 1.1.1.2
88
Internet Group Management Protocol (IGMP)