Users Guide

– password: Enter a string.
To change only the password for the enable command, congure only the password parameter.
To view the conguration for the enable secret command, use the show running-config command in EXEC Privilege
mode.
In custom-congured privilege levels, the enable command is always available. No matter what privilege level you entered, you can
enter the
enable 15 command to access and congure all CLIs.
Conguring Custom Privilege Levels
In addition to assigning privilege levels to the user, you can congure the privilege levels of commands so that they are visible in
dierent privilege levels.
Within the Dell Networking OS, commands have certain privilege levels. With the privilege command, you can change the
default level or you can reset their privilege level back to the default. Assign the launch keyword (for example, configure) for the
keyword’s command mode.
To assign commands and passwords to a custom privilege level, use the following commands. You must be in privilege level 15.
1. Assign a user name and password.
CONFIGURATION mode
username name [access-class access-list-name] [privilege level] [nopassword | password
[encryption-type] password] [secret]
Congure the optional and required parameters:
• name: enter a text string (up to 63 characters).
• access-class access-list-name: enter the name of a congured IP ACL.
• privilege level: the range is from 0 to 15.
• nopassword: do not require the user to enter a password.
• encryption-type: enter 0 for plain text or 7 for encrypted text.
• password: enter a text string.
• secret: specify the secret for the user.
2. Congure a password for privilege level.
CONFIGURATION mode
enable password [level level] [encryption-mode] password
Congure the optional and required parameters:
• level level: specify a level from 0 to 15. Level 15 includes all levels.
• encryption-type: enter 0 for plain text or 7 for encrypted text.
• password: enter a text string up to 32 characters long.
To change only the password for the enable command, congure only the password parameter.
3. Congure level and commands for a mode or reset a command’s level.
CONFIGURATION mode
privilege mode {level level command | reset command}
Congure the following required and optional parameters:
• mode: enter a keyword for the modes (exec, configure, interface, line, route-map, or router)
• level level: the range is from 0 to 15. Levels 0, 1, and 15 are pre-congured. Levels 2 to 14 are available for custom
conguration.
• command: an Dell CLI keyword (up to ve keywords allowed).
Security
173