Users Guide
• vlan: deletes all entries for the specied VLAN.
Displaying the MAC Address Table
To display the MAC address table, use the following command.
• Display the contents of the MAC address table.
EXEC Privilege mode
NOTE: This command is available only in PMUX mode.
show mac-address-table [address | aging-time [vlan vlan-id]| count | dynamic | interface
| static | vlan]
– address: displays the specied entry.
– aging-time: displays the congured aging-time.
– count: displays the number of dynamic and static entries for all VLANs, and the total number of entries.
– dynamic: displays only dynamic entries.
– interface: displays only entries for the specied interface.
– static: displays only static entries.
– vlan: displays only entries for the specied VLAN.
Network Interface Controller (NIC) Teaming
NIC teaming is a feature that allows multiple network interface cards in a server to be represented by one MAC address and one IP
address in order to provide transparent redundancy, balancing, and to fully utilize network adapter resources.
Support for NIC teaming is auto-congured on the Aggregator, including support for:
• MAC Address Station Move
• MAC Move Optimization
The below g shows a topology where two NICs have been teamed together. In this case, if the primary NIC fails, trac switches to
the secondary NIC, because they are represented by the same set of addresses.
Layer 2
137