Reference Guide

Debugging and Diagnostics | 283
• When you restore the units in stand-alone mode, the units remain in stand-alone mode after the
restoration.
• After the restore is complete, the units power cycle immediately.
Figure 4-9 shows an example of using the restore factory-defaults command to restore the Factory
Default Settings.
Figure 21-21. Restoring the Factory Default Settings
FTOS#restore factory-defaults stack-unit 0 nvram
***********************************************************************
* Warning - Restoring factory defaults will delete the existing *
* persistent settings (stacking, fanout, etc.) *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
***********************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
0 Success
Power-cycling the unit(s).
....