Reference Guide

Configuration Fundamentals | 7

Figure 2-5. Undoing a command with the no Command

Obtaining Help

Obtain a list of keywords and a brief functional description of those keywords at any CLI mode using the ?

help commands:

•Enter

? at the prompt or after a keyword to list the keywords available in the current mode.

•

? after a prompt lists all of the available keywords. The output of this command is the same for the

help command.

Figure 2-6. ? Command Example

• ? after a partial keyword lists all of the keywords that begin with the specified letters.

FTOS(conf)# interface managementethernet 0/0

FTOS(conf-if-ma-0/0)# ip address 192.168.5.6/16

FTOS(conf-if-ma-0/0)#

FTOS(conf-if-ma-0/0)#show config

interface ManagementEthernet 0/0

ip address 192.168.5.6/16

no shutdown

FTOS(conf-if-ma-0/0)#

FTOS(conf-if-ma-0/0)# no ip address

FTOS(conf-if-ma-0/0)#

FTOS(conf-if-ma-0/0)# show config

interface ManagementEthernet 0/0

no ip address

no shutdown

FTOS(conf-if-ma-0/0)#

Assign an IP address

Enter “no” form of IP address command

Verify that the IP address was removed

“?” at prompt for list of commands

FTOS#?

start Start Shell

capture Capture Packet

cd Change current directory

clear Reset functions

clock Manage the system clock

configure Configuring from terminal

copy Copy from one file to another

--More--