Reference Guide

148 | Interfaces
www.dell.com | support.dell.com
You can display interface statistics with the monitor interface command. This command displays an
ongoing list of the interface status (up/down), number of packets, traffic statistics, etc.
The information displays in a continuous run, refreshes every two seconds by default (Figure 9-18). Use
the following keys to manage the output.
Command Syntax Command Mode Purpose
monitor interface interface EXEC Privilege View interface statistics. Enter the type of interface and slot/
port information:
• For a 1GbE interface, enter the keyword
GigabitEthernet
followed by the slot/port numbers; for example, interface
gigabitethernet 0/12.
• For a 10GbE interface, enter the keyword
TenGigabitEthernet followed by the slot/port numbers;
for example, interface tengigabitethernet 0/44.
m - Change mode c - Clear screen
l - Page up a - Page down
T - Increase refresh interval (by 1 second) t - Decrease refresh interval (by 1 second)
q - Quit