Concept Guide

Cong-State Indicates whether the congured FCoE and FC parameters in the FCoE map are valid: Active
(all mandatory FCoE and FC parameters are correctly congured) or Incomplete (either the
FC-MAP value, fabric ID, or VLAN ID are not correctly congured).
Oper-State Operational status of the link to the fabric: up (link is up and transmitting FC trac), down (link
is down and not transmitting FC trac), link-wait (link is up and waiting for FLOGI to complete
on peer FC port), or removed (port has been shut down).
Members Aggregator with the FC ports, which are members of the dedicated FCoE VLAN that carries
storage trac to the specied fabric.
show qos dcb-map Command Examples
Dell# show qos dcb-map dcbmap2
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Priorities:0 1 2 4 5 6 7
PG:1 TSA:ETS BW:50 PFC:ON
Priorities:3
Table 43. show qos dcb-map Field Descriptions
Field Description
State Complete: All mandatory DCB parameters are correctly congured. In progress: The DCB map
conguration is not complete. Some mandatory parameters are not congured.
PFC Mode PFC conguration in the DCB map: On (enabled) or O.
PG Priority group congured in the DCB map.
TSA Transmission scheduling algorithm used in the DCB map: Enhanced Transmission Selection
(ETS).
BW Percentage of bandwidth allocated to the priority group.
PFC PFC setting for the priority group: On (enabled) or O.
Priorities 802.1p priorities congured in the priority group.
show npiv devices brief Command Example
Dell# show npiv devices brief
Total NPIV Devices = 2
------------------------------------------------------------------------------------------------
--------
ENode-Intf ENode-WWPN FCoE-Vlan Fabric-Intf Fabric-Map LoginMethod
Status
------------------------------------------------------------------------------------------------
--------
330
NPIV Proxy Gateway