Concept Guide

FC FLEXIO FPORT
FC FlexIO FPort is now supported on the Dell Networking OS.
Topics:
• FC FLEXIO FPORT
• Conguring Switch Mode to FCF Port Mode
• Name Server
• FCoE Maps
• Creating an FCoE Map
• Zoning
• Creating Zone and Adding Members
• Creating Zone Alias and Adding Members
• Creating Zonesets
• Activating a Zoneset
• Displaying the Fabric Parameters
FC FLEXIO FPORT
The switch is a blade switch which is plugged into the Dell M1000 Blade server chassis.The blade module contains two slots for pluggable
exible module. With single FC Flex IO module, 4 ports are supported, whereas 8 ports are supported with both FC Flex IO modules. Each
port can operate in 2G, 4G or 8G Fiber Channel speed. The topology-wise, FC Flex IOM is directly connected to a FC Storage. In the
following topology, the FC ex IOM model oers local connectivity without a SAN switch or fabric.
27
FC FLEXIO FPORT 309