Administrator Guide

Field Description

Admin mode is enabled on the remote port for

DCBx exchange, the Willing bit received in ETS

TLVs from the remote peer is included.

Local Parameters ETS configuration on local port, including Admin

mode (enabled when a valid TLV is received from a

peer), priority groups, assigned dot1p priorities, and

bandwidth allocation.

Operational status (local port) Port state for current operational ETS

configuration:

• Init: Local ETS configuration parameters were

exchanged with peer.

• Recommend: Remote ETS configuration

parameters were received from peer.

• Internally propagated: ETS configuration

parameters were received from configuration

source.

ETS DCBx Oper status Operational status of ETS configuration on local

port: match or mismatch.

State Machine Type Type of state machine used for DCBx exchanges of

ETS parameters:

• Feature: for legacy DCBx versions

• Asymmetric: for an IEEE version

Conf TLV Tx Status Status of ETS Configuration TLV advertisements:

enabled or disabled.

Reco TLV Tx Status Status of ETS Recommendation TLV

advertisements: enabled or disabled.

Input Conf TLV pktsOutput Conf TLV pktsError

Conf TLV pkts

Number of ETS Configuration TLVs received and

transmitted, and number of ETS Error

Configuration TLVs received.

Input Reco TLV pktsOutput Reco TLV pktsError

Reco TLV pkts

Number of ETS Recommendation TLVs received

and transmitted, and number of ETS Error

Recommendation TLVs received.

Example of the show stack-unit all stack-ports all pfc details Command

Dell# show stack-unit all stack-ports all pfc details

stack unit 0 stack-port all

Admin mode is On

Admin is enabled, Priority list is 4-5

Local is enabled, Priority list is 4-5

Link Delay 45556 pause quantum

0 Pause Tx pkts, 0 Pause Rx pkts

stack unit 1 stack-port all

Data Center Bridging (DCB)