Users Guide
---------------- show server ports brief ---------------------
Interface OK Status Protocol Description
TenGigabitEthernet 0/1 YES up up
TenGigabitEthernet 0/2 YES up up
TenGigabitEthernet 0/3 YES up up
TenGigabitEthernet 0/4 NO up down
TenGigabitEthernet 0/5 YES up up
TenGigabitEthernet 0/6 NO up down
TenGigabitEthernet 0/7 YES up up
TenGigabitEthernet 0/8 NO up down
----------------------------------- show lacp ---------------------------
Interface OK Status Protocol Description
Port-channel 1 YES up up
Dell#
Example (detail
Command)
Dell#show server-interfaces detail
---------------- show server ports detail ---------------------
TenGigabitEthernet 0/1 is up, line protocol is up
Hardware is DellEth, address is 00:1e:c9:de:03:79
Current address is 00:1e:c9:de:03:79
Server Port AdminState is N/A
Pluggable media not present
Interface index is 33886978
Internet address is not set
Mode of IPv4 Address Assignment : NONE
DHCP Client-ID :001ec9de0379
MTU 12000 bytes, IP MTU 11982 bytes
LineSpeed 10000 Mbit
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 2d16h24m
Queueing strategy: fifo
Input Statistics:
10701 packets, 1123557 bytes
0 64-byte pkts, 10701 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
10701 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
442113 packets, 46047526 bytes, 0 underruns
870 64-byte pkts, 362829 over 64-byte pkts, 55411 over 127-byte pkts
--More--
show system
Displays the current status of all stack members or a specic stack member.
Syntax
show system [brief | stack-unit unit-id]
Parameters
brief (OPTIONAL) Enter the keywordbrief to view an abbreviated list of system information.
stack unit unit–id (OPTIONAL) Enter the keywordsstack unit then the stack member ID for information
on the stack member. The range is from 0 to 5.
Command Modes
• EXEC
72
Control and Monitoring