Users Guide

Example (media)
Dell#show inventory media ?
<0-5> Slot number
| Pipe through a command
Dell#show inventory media
Slot Port Type Media Serial Number F10Qualified
------------------------------------------------------------------------------
0 9 SFP+ 10GBASE-CU1M APF11380028XGQ Yes
0 10 SFP+ 10GBASE-CU2M APF12090032HDL Yes
0 11 SFP+ 10GBASE-CU2M APF12090032HFB Yes
0 12 SFP+ 10GBASE-CU0.5M APF12490013FP2 Yes
Dell#
Example (optional-
module)
Dell#show inventory optional-module
Unit Slot Expected Inserted Next Boot Status/Power(On/Off)
------------------------------------------------------------------------
1 0 SFP+ SFP+ AUTO Good/On
1 1 QSFP+ QSFP+ AUTO Good/On
* - Mismatch
Dell#
Related Commands
show cong (from INTERFACE VLAN mode) — displays information on a specic physical interface or virtual interface.
show memory
Display current memory usage on the M I/O Aggregator.
Syntax
show memory [stack-unit 0–5]
Parameters
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack unit ID of the stack
member to display memory information on the designated stack member.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The output for show memory command displays the memory usage of LP part (sysdlp) of the system. The
sysdlp is an aggregate task that handles all the tasks running on the CPU.
Example
Dell#show memory
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
64
Control and Monitoring