Users Guide

Version Description

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

show environment

Displays the system component status (for example, temperature or voltage).

Syntax

show environment [all | stack-unit unit-id]

Parameters

all Enter the keyword all to view all components.

stack-unit unit-id Enter the keywords stack-unit then the unit-id to display information on a specic

stack member. The range is from 0 to 5.

thermal sensor Enter the keywords thermal-sensor to view all components.

Command Modes

• EXEC

• EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Example (all)

Dell#show environment all

-- Unit Environment Status --

Unit Status Temp Voltage TempStatus

---------------------------------------------------------------------------

* 1 online 66C ok 2

* Management Unit

-- Thermal Sensor Readings (deg C) --

Unit Sensor0 Sensor1 Sensor2 Sensor3 Sensor4 Sensor5 Sensor6 Sensor7

Sensor8 Sensor9

--------------------------------------------------------------------------------

----------------

1 51 51 63 61 61 61 67 61

64 66

Dell#

Example (stack-unit)