Users Guide

password for the enable command at a specic privilege level. If no privilege level is specied, the default
is privilege level 15.
Related Commands enable password — congures a password for the enable command and to access a privilege level.
end
Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION mode).
Syntax
end
Command Modes
• CONFIGURATION
• LINE
• INTERFACE
• MONITOR SESSION
• PROTOCOL LLDP
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related Commands exit— returns to the lower command mode.
exit
Return to the lower command mode.
Syntax
exit
Command Modes
• EXEC Privilege
• CONFIGURATION
• LINE
• INTERFACE
• PROTOCOL LLDP
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
50
Control and Monitoring