Users Guide
NOTE: Use this command only when you are working directly with a technical support
representative to troubleshoot a problem. Do not use this command unless a technical support
representative instructs you to do so.
disable
Return to EXEC mode.
Syntax
disable [level]
Parameters
level (OPTIONAL) Enter a number for a privilege level of the Dell Networking OS. The
range is from 0 to 15. The default is 1.
Defaults 1
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
enable
Enter EXEC Privilege mode or any other privilege level congured. After entering this command, you may need to enter a password.
Syntax
enable [level]
Parameters
level (OPTIONAL) Enter a number for a privilege level of the Dell Networking OS. The
range is from 0 to 15. The default is 15.
Defaults 15
Command Modes EXEC
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information Users entering EXEC Privilege mode or any other congured privilege level can access conguration
commands. To protect against unauthorized access, use the enable password command to congure a
Control and Monitoring
49