Users Guide
upgrade boot
Upgrade the bootash image or bootselector image.
Syntax
upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 |
all} {booted | flash: |ftp: | tftp: | usbflash:} (A: | B:}
Parameters
all Enter the keyword all to change both the bootash and bootselecter images.
bootash-image Enter the keywords bootflash-image to change the bootash image.
bootselector-image Enter the keywords bootselector-image to change the bootselector image.
0–5 Enter the keyword 0–5 to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member stack-units.
booted Enter the keyword booted to upgradefrom the current image in the M I/O
Aggregator.
ftp: After entering the keyword ftp:, you can either follow it with the location of the
source le in this form: //userid:password@hostip/filepath or press
Enter to launch a prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it with the location of the
source le in this form: //hostlocation/filepath or press Enter to launch a
prompt sequence.
ash: After entering the keyword flash:, you can either follow it with the location of
the source le in this form: //filepath or press Enter to launch a prompt
sequence.
usbash: After entering the keyword usbflash:, you can either follow it with the location
of the source le in this form: //filepath or press Enter to launch a prompt
sequence.
A: Enter this keyword to upgrade the bootash partition A.
B: Enter this keyword to upgrade the bootash partition B.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
You must reload the Dell Networking OS after executing this command.
Example
Dell#upgrade boot ?
all Upgrade both boot flash image and selector image
bootflash-image Upgrade boot flash image
bootselector-image Upgrade boot selector image
Dell#
File Management
43