Users Guide

Usage Information
NOTE: A lepath that contains a dot ( . ) is not supported.
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
--------------------------------------------------------------
Platform Version Size ReleaseTime
IOM-Series: XL 8-3-17-38 31603078 Jul 19 2012 06:02:28
TARGET IMAGE INFORMATION :
--------------------------------------------------------------
Type Version Target checksum
runtime 8-3-17-38 Control Processor passed
CPLD IMAGE INFORMATION :
--------------------------------------------------------------
Card CPLD Name Version
Stack-unit 1 IOM SYSTEM CPLD 6
Dell#
show running-cong
Displays the current conguration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) conguration, enter one
of the following keywords:
NOTE: If you did not congure anything for that entity, nothing displays
and the prompt returns.
boot
for the current boot conguration
ftp
for the current FTP conguration
igmp
for the current IGMP conguration
interface
for the current interface conguration
line
for the current line conguration
lldp
for the current lldp conguration
logging
for the current logging conguration
management-
route
for the current Management port forwarding
conguration
monitor
for the current Monitor conguration
snmp
for the current SNMP conguration
uplink-state-
group
for the uplink state group conguration
users
for the current users conguration
40
File Management