Users Guide
Version Description
9.2(0.0) Introduced on the M I/O Aggregator.
show storm-control unknown-unicast
Display the storm control unknown-unicast conguration.
Syntax
show storm-control unknown-unicast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface specic
storm control conguration:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then y the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/ port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Programmable-Mux (PMUX)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(0.0) Introduced on the M I/O Aggregator.
storm-control unknown-unicast (Interface)
Congure percentage of unknown-unicast trac allowed on the interface.
Syntax
storm-control unknown-unicast [packets_per_second in]
To disable unknown-unicast storm control on the interface, use the no storm-control unknown-
unicast [packets_per_second in] command.
Parameters
packets_per_secon
d
Enter the packets per second of broadcast trac allowed into the network. The
range is from 0 to 33554431.
370
Storm Control