Users Guide
1 Success
Power-cycling the unit(s).
Dell#
show boot system
Displays information about boot images currently congured on the system.
Syntax
show boot system stack-unit {0-5 | all}
Parameters
0–5 Enter this information to display the boot image information of only the entered
stack-unit.
all Enter the keyword all to display the boot image information of all the stack-units
in the stack.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show boot system stack-unit all
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------
Stack-unit 0 is not present.
Stack-unit 1 DOWNLOAD BOOT 9-1-0-218 9-1-0-202
Stack-unit 2 is not present.
Stack-unit 3 is not present.
Stack-unit 4 is not present.
Stack-unit 5 is not present.
show le
Displays contents of a text le in the local lesystem.
Syntax
show file url
Parameters
url Enter one of the following:
• For a le on the internal Flash, enter flash:// then the lename.
File Management
37