Users Guide

snmp-server context
Congure a new context to an SNMP server.
Syntax
snmp-server context {line}
To remove a user from the SNMP group, use the snmp-server context {line} command.
Parameters
line Enter the context string (max 32 characters), on the host that connects to the
agent.
Defaults As above.
Command Modes CONFIGURATION
Supported Modes Programmable-Mux (PMUX)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the M I/O Aggregator.
Example
Dell(conf)#snmp-server context ?
LINE Context String (max 32 chars)
Dell(conf)#snmp-server context test1234 ?
Related Commands show snmp user— displays the information congured on each SNMP user name.
snmp-server enable traps
Enable SNMP traps.
Syntax
snmp-server enable traps [snmp] [stack]
To disable traps, use the no snmp-server enable traps [snmp] [stack] command.
Parameters
stack Enable stacking role change traps.
snmp
For the snmp notication-type, enter one of the following optional parameters:
• linkdown
• linkup
Defaults Not enabled.
Command Modes CONFIGURATION
Supported Modes Programmable-Mux (PMUX)
Simple Network Management Protocol (SNMP) and Syslog
349