Users Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the M I/O Aggregator.
Example
45418 SNMP packets input
0 Bad SNMP version errors
12 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
45275 Number of requested variables
0 Number of altered variables
76 Get-request PDUs
45265 Get-next PDUs
0 Set-request PDUs
45406 SNMP packets output
0 Too big errors (Maximum packet size 1500)
31 No such name errors
0 Bad values errors
0 General errors
45341 Response PDUs
0 Trap PDUs
Dell#
Related Commands snmp—server community— enables the SNMP and set community string.
show snmp engineID
Display the identication of the local SNMP engine and all remote engines that are congured on the router.
Syntax
show snmp engineID
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Programmable-Mux (PMUX)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the M I/O Aggregator.
Example
Dell#show snmp engineID
Local SNMP engineID: 0000178B02000001E80214A8
Remote Engine ID IP-addr Port
80001F88043132333435 172.31.1.3 5009
80001F88043938373635 172.31.1.3 5008
Dell#
Related Commands snmp-server engineID — congures local and remote SNMP engines on the router.
Simple Network Management Protocol (SNMP) and Syslog
345