Users Guide

-p port-number (OPTIONAL) Enter the keyword -p followed by the port number. The range is from
1 to 65536. The default is 22.
-v {1 | 2} (OPTIONAL) Enter the keyword -v then the SSH version 1 or 2. The default is the
version from the protocol negotiation.
Defaults As shown in the Parameters section.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#ssh 10.16.151.48 -l anvltest
Trying 10.16.151.48...
01:18:16: %STKUNIT0-M:CP %SEC-5-SSH_USAGE: Initiated SSH Client v2 (FIPS
Disabled) to anvltest@10.16.151.48 by default from console
anvltest@10.16.151.48's password:
Last login: Thu Jan 5 00:17:47 2012 from login-maa-101
[anvltest@dt-maa-linux-1 ~]# exit
logout
Dell#
username
Establish an authentication system based on user names.
Syntax
username name access-list-name [nopassword | {password | secret}
[encryption-type] password] [privilege level]
If you do not want a specic user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
Parameters
name Enter a text string for the name of the user up to 63 characters.
access-list-name Enter the name of a congured access control list (either an IP access control list
or MAC access control list).
nopassword Enter the keyword nopassword to specify that the user should not enter a
password.
password Enter the keyword password followed by the encryption-type or the
password.
secret Enter the keyword secret followed by the encryption-type or the password.
encryption-type Enter an encryption type for the password that you enter.
• 0 directs Dell Networking OS to store the password as clear text. It is the
default encryption type when using the
password option.
• 7 to indicate that a password encrypted using a DES hashing algorithm follows.
This encryption type is available with the password option only.
342
Security