Users Guide

Parameters
policy-map-name Enter the name for the policy map in character format (16 characters maximum).
You can identify an existing policy map or name one that does not yet exist.
Defaults none
Command Modes INTERFACE
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modied.
Related Commands
policy-map-output — creates an output policy map.
service-queue
Assign a class map and QoS policy to dierent queues.
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-
name]
To remove the queue assignment, use the no service-queue queue-id [class-map class-
map-name] [qos-policy qos-policy-name] command.
Parameters
queue-id Enter the value used to identify a queue. The range is from 0 to 3 (four queues per
interface; four queues are reserved for control trac).
class-map class-
map-name
(OPTIONAL) Enter the keyword class-map then the class map name assigned to
the queue in character format (32 character maximum).
NOTE: This option is available under policy-map-input only.
qos-policy qos-
policy-name
(OPTIONAL) Enter the keywords qos-policy then the QoS policy name
assigned to the queue in text format (32 characters maximum). This species the
input QoS policy assigned to the queue under policy-map-input and output
QoS policy under
policy-map-output context.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Supported Modes Programmable-Mux (PMUX)
312
Quality of Service (QoS)