Users Guide

Parameters
description Enter a description regarding this session (80 characters maximum).
Defaults none
Command Modes MONITOR SESSION (conf-mon-sess-session-ID)
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related Commands
monitor session — enables a monitoring session.
monitor session
Create a session for monitoring trac with port monitoring.
Syntax
monitor session session-ID
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID Enter a session identication number. The range is from 0 to 65535.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The monitor command is saved in the running conguration at Monitor Session mode level and can be
restored after a chassis reload.
Example
Dell(conf)# monitor session 60
Dell(conf-mon-sess-60)
Related Command
show monitor session — Displays the monitor session.
show running-cong monitor session — Displays the running conguration of a monitor session.
300
Port Monitoring