Users Guide

name vlan-name (OPTIONAL) Enter the keyword name followed by the name congured for the
VLAN. Only information on the VLAN named is displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show vlan command information given in the following example
Column Heading Description
(Column 1 — no
heading)
• asterisk symbol (*) = Default VLAN
• G = GVRP VLAN
• P = primary VLAN
• C = community VLAN
• I = isolated VLAN
NUM Displays existing VLAN IDs.
Status Displays the word Inactive for inactive VLANs and the word Active for active
VLANs.
Q Displays G for GVRP tagged, M for member of a VLAN-Stack VLAN, T for tagged
interface, U (for untagged interface), x (uncapitalized x) for Dot1x untagged, or X
(capitalized X) for Dot1x tagged.
Ports
Displays the type, slot, and port information. For the type, Po = port channel, Fo=
fortygigabit ethernet, and Te = ten gigabit ethernet.
Example
Dell# show vlan id 40
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring
VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V
- VLT tagged
NUM Status Description Q Ports
1 Inactive a
Dell#
Example (Brief)
Dell#show vlan brief
VLAN Name STG MAC Aging IP Address
---- -------------------------------- ---- --------- ------------------
1 0 0 unassigned
2 0 0 unassigned
20 0 0 unassigned
1002 0 0 unassigned
Dell#
Interfaces
225