Users Guide

Example-Single
Range Bulk
Conguration
Dell(conf)# interface range tengigabitethernet 5/1 - 23
Dell(conf-if-range)# no shutdown
Dell(conf-if-range)#
Example-Multiple
Range Bulk
Conguration
Gigabit Ethernet and
Ten Gigabit Ethernet
The following example shows how to use commas to add dierent interface types to the range enabling all
TenGigabit Ethernet interfaces in the range 5/1 to 5/23 and both Ten Gigabit Ethernet interfaces 1/1 and
1/2.
Dell(conf-if)# interface range tengigabitethernet 5/1 - 23,
tengigabitethernet 1/1 - 2
Dell(conf-if-range)# no shutdown
Dell(conf-if-range)#
Example-Multiple
Range Bulk
Conguration with
VLAN and port
channel
The following example shows how to use commas to add VLAN and port-channel interfaces to the range.
Dell(conf-if)# interface range tengigabitethernet 5/1 - 23,
tengigabitethernet 1/1 – 2,
Vlan 2 – 100 , Port 1 – 25
Dell(conf-if-range)# no shutdown
Dell(conf-if-range)#
Related commands show cong (from INTERFACE RANGE mode)— Shows the bulk conguration interfaces.
show interfaces status— Displays a summary of interface information.
interface vlan
Congure a VLAN. Congure the default VLAN to enable Static or DCHP IP conguration. You can congure up to 4094 VLANs.
Syntax
interface vlan vlan-id
To delete a VLAN, use the no interface vlan vlan-id command.
Parameters
vlan-id Enter 1 for the default VLAN. Enter a number as the VLAN identier. The range is
from 1 to 4096.
Defaults Not congured, except for the default VLAN, which is congured as VLAN 1.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information For more information about VLANs and the commands to congure them, refer to Virtual LAN (VLAN)
Commands.
FTP, TFTP, and SNMP operations are not supported on a VLAN. MAC/IP ACLs are not supported.
Interfaces
201