Users Guide

• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
The following table describes the show fip-snooping fcf command.
Field Description
FCF MAC MAC address of the FCF
FCF Interface Slot/ port number of the interface to which the FCF is connected.
VLAN VLAN ID number used by the session
FC-MAP FC-MAP value advertised by the FCF.
FKA_ADV_PERIOD Period of time (in milliseconds) during which FIP keep-alive advertisements are
transmitted.
No of ENodes Number of ENodes connected to the FCF
Example
Dell# show fip-snooping fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No.
of Enodes
------- ------------- ---- ------ --------------
-------------
54:7f:ee:37:34:40 Po 128 100 0e:fc:00
4000 1
show
p-snooping sessions
Displays information on FIP-snooped sessions on all VLANs or a specied VLAN, including the ENode interface and MAC address,
the FCF interface and MAC address, VLAN ID, FCoE MAC address and FCoE session ID number (FC-ID), worldwide node name
(WWNN) and the worldwide port name (WWPN).
Syntax
show fip-snooping sessions[interface vlan vlan-id]
Parameters
vlan-id Enter the vlan-id of the specied VLAN to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
172
FIP Snooping