Users Guide

debug p-snooping
Enable the debug FIP protocol specic messages.
Syntax
debug fip-snooping [all|acl|error|ifm|info|ipc|rx]
Parameters
all Enable all the debug options.
acl Enable for ACL specic debugs
error Enable for Error specic debugs
ifm Enable for IFM specic debugs
info Enable for Information specic debugs
ipc Enable for IPC specic debugs
rx Enable for packet receive specic debugs
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
show p-snooping cong
Displays the FIP snooping status and congured FC-MAP values.
Syntax
show fip-snooping config
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
Dell#
170
FIP Snooping