Users Guide

Version Description
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
show p-snooping statistics
Displays statistics on the FIP packets snooped on all interfaces, including VLANs, physical ports, and port channels..
Syntax
show fip-snooping statistics [interface vlan vlan-id | interface port-type
port/slot | interface port-channel port-channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be displayed.
port-type port/slot Enter the port-type and slot number of the FIP packet statistics to be displayed.
port-channel-
number
Enter the port channel number of the FIP packet statistics to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
The following table describes the show fip-snooping statistics command.
Field Description
Number of Vlan
Requests
Number of FIP-snooped VLAN request frames received on the interface.
Number of VLAN
Notications
Number of FIP-snooped VLAN notication frames received on the interface
Number of
Multicast Discovery
Solicits
Number of FIP-snooped multicast discovery solicit frames received on the
interface.
Number of Unicast
Discovery
Number of FIP-snooped unicast discovery solicit frames received on the interface.
Number of FLOGI
Number of FIP-snooped FLOGI request frames received on the interface.
FIP Snooping
167