Users Guide

fc zone
Create a zone.
Syntax
fc zone zonename member
To delete a zone, use the no fc zone zonename member command.
Parameters
zonename Enter the zone name.
member Enter the WWPN, port ID, or domain/port.
Command Modes ALIAS CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.7(0.0) Introduced on the M I/O Aggregator.
Example without
member
Dell(conf)# fc zone z1
Dell(conf-fc-zone-z1)#
Example with
member
Dell(conf)#fc zone test
Dell(conf-fc-zone-test)#member ?
WORD WWN(00:00:00:00:00:00:00:00), portID(000000), or
Alias name(word)
Dell(conf-fc-zone-test)#member
Related Commands
show fc zone — displays the congured zone.
show fcoe-map — displays the fabric parameters.
fc zoneset
Create a zoneset.
Syntax
fc zoneset zoneset_name [member]
To delete a zoneset, use the no fc zoneset zoneset_name [member] command.
Parameters
zoneset_namemem
ber
Enter the zoneset name.
Enter the WWPN, FC-ID, or Alias name.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version
9.9(0.0) Supported on the FN I/O Aggregator.
156
FC FLEXIO FPORT