Users Guide

Switch WWN Factory-assigned worldwide node (WWN) name of the Aggregator. The M I/O
Aggregator WWN name is not user-congurable.
Example
Dell(conf)#do show fc switch
Switch Mode : NPG
Switch WWN : 10:00:aa:00:00:00:00:ac
Dell(conf)#
show fcoe-map
Display the Fibre Channel and FCoE conguration parameters in FCoE maps.
M I/O Aggregator with the FC Flex IO module
Syntax
show fcoe-map [brief | map-name]
Parameters
brief Displays an overview of currently congured FCoE maps.
map-name Displays the FC and FCoE conguration parameters in a specied FCoE map. The
FCoE map is applied on Ethernet (FCoE) and FC ports to transmit FC storage
trac to a specied fabric.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex
IO module.
Usage Information
Use the show fcoe-map command to display the FC and FCoE parameters used to congure server-
facing Ethernet (FCoE) and fabric-facing FC ports in all FCoE maps on an M I/O Aggregator with the FC
Flex IO module NPIV proxy gateway.
In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN fabric to which FC
storage trac is sent, and the FCoE VLAN to be used must be unique.
An FCoE map is used to identify the SAN fabric to which FCoE storage trac is sent and to virtualize M I/O
Aggregator with the FC Flex IO module FC ports so that they appear to downstream server CNA ports as
FCoE Forwarder (FCF) ports on an FCoE network.
The following table describes the show fcoe-map brief output shown in the example below.
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC trac is forwarded.
148
FC Flex IO Modules