Reference Guide

Control and Monitoring | 43
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type] password
Parameters
Defaults
Not enabled.
Command Modes
CONFIGURATION
Command
History
hostname
Set the host name of the system.
Syntax
hostname name
Parameters
Defaults
FTOS
Command Modes
CONFIGURATION
Command
History
ip telnet server enable
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
History
username
Enter a text string up to 40 characters long as the user name.
password password Enter the keyword password followed by a string up to 40 characters long as
the password.
Without specifying an encryption type, the password is unencrypted.
encryption-type
(OPTIONAL) After the keyword password enter one of the following
numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for hidden text password.
Version 8.3.17.0 Supported on M I/O Aggregator
name
Enter a text string, up to 32 characters long.
Version 8.3.17.0 Supported on M I/O Aggregator
Version 8.3.17.0 Supported on M I/O Aggregator