Reference Guide

32 | File Management
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
Example
Figure 4-9. show running-config Command Example (Partial)
Example
Figure 4-10. show running-config Command Example
Usage
Information
The status option allows you to display the size and checksum of the running configuration and the
startup configuration
show version
Displays the current FTOS version information on the system.
Syntax
show version
Command Modes
EXEC Privilege
Command
History
•
management-route for the current Management port forwarding
configuration
•
monitor for the current Monitor configuration
•
snmp for the current SNMP configuration
•
uplink-state-group for the uplink state group configuration
•
users for the current users configuration
status
(OPTIONAL) Enter the keyword status to display the checksum for the
running configuration and the start-up configuration.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show running-config
Current Configuration ...
! Version E8-3-17-38
! Last configuration change at Mon Jul 23 14:34:31 2012 by default
!
boot system stack-unit 1 primary tftp://10.11.9.21/dv-m1000e-2-b2
boot system stack-unit 1 default system: A:
boot system gateway 10.11.209.62
!
redundancy auto-synchronize full
!
service timestamps log datetime
!
hostname FTOS
...
FTOS#show running-config status
running-config bytes 5063, checksum 0xF6F801AC
startup-config bytes 4835, checksum 0x764D3787
FTOS#
Version 8.3.17.0 Supported on M I/O Aggregator