Reference Guide

File Management | 31
Parameters
Defaults
none
Command Modes
EXEC Privilege
Command
History
Usage
Information
Example
Figure 4-8. show os-version Command Example
show running-config
Displays the current configuration and changes from the default values.
Syntax
show running-config [entity] [configured] [status]
Parameters
file-url
(OPTIONAL) Enter the following location keywords and information:
• For a file on the internal Flash, enter
flash:// followed by the filename.
• For a file on an FTP server, enter
ftp://user:password@hostip/filepath
• For a file on a TFTP server, enter tftp://hostip/filepath
• For a file on the external Flash, enter usbflash:// followed by the filename.
Version 8.3.17.0 Supported on M I/O Aggregator
Note: A filepath that contains a dot (.) is not supported.
FTOS#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------------
Platform Version Size ReleaseTime
IOM-Series: XL 8-3-17-38 31603078 Jul 19 2012 06:02:28
TARGET IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
runtime 8-3-17-38 Control Processor passed
CPLD IMAGE INFORMATION :
---------------------------------------------------------------------
Card CPLD Name Version
Stack-unit 1 IOM SYSTEM CPLD 6
FTOS#
entity
(OPTIONAL) Enter one of the keywords listed below to display that entity’s
current (non-default) configuration. Note that, if nothing is configured for
that entity, nothing is displayed and the prompt returns:
• boot for the current boot configuration
•
ftp for the current FTP configuration
•
igmp for the current IGMP configuration
•
interface for the current interface configuration
•
iscsi for the current ISCSI configuration
•
line for the current line configuration
•
lldp for the current LLDP configuration
•
logging for the current logging configuration