Reference Guide

Debugging and Diagnostics | 245
Example 4
Figure 25-4. show diag testcase stack-unit interactive Command Example
show hardware stack-unit
Displays the data plane or management plane input and output statistics of the designated component
of the designated stack member.
Syntax
show hardware stack-unit 0-5 {buffer [buffer unit | port [(1-56) | all] total buffer | buffer unit (1) port
(1-56)
queue [(0-14) | a11] buffer-info} {phy-firmware-version} {cpu data-plane statistics
[stack-port 0-52] | cpu party-bus statistics | cpu private-mgmt statistics | drops [unit 0-1 [port
1-56]] | stack-port 33-56 | unit 0-0 {counters | details | port-stats [detail] | register}}
Parameters
FTOS#show diag testcase stack-unit 0 interactive
**************************** Navasota Diagnostics Test
*************************
Test ID Test Description Test Level
------- ---------------- ----------
401 POWERLEDTEST Interactive
402 DEBUGLEDTEST Interactive
403 STATUSLEDTEST Interactive
404 OPTMODLEDCONTROLTEST Interactive
405 FIXEDLEDCONTROLTEST Interactive
406 RTCBATTERYTEST Interactive
407 CPLDRESETTEST Interactive
408 I2CDEVICESCANTEST Interactive
409 SERVERPORTPHYEXTLINKTEST Interactive
410 CPUSNAKEQSFPPEXTLPBKTEST Interactive
411 CPUSNAKEOPTMODEXTLPBKTEST Interactive
Total Diagnostic Testcases in Interactive: 11
************************************* END
**************************************
stack-unit 0-5
{command-option}
Enter the keyword stack-unit followed by 0 to 5 to select a particular stack
member and then enter one of the following command options to display a
collection of data based on the option entered.
buffer Enter the keyword buffer, optionally followed by the keywords
total-buffer to show the total buffer statistics per stack unit. Enter the
keywords
buffer unit then total-buffer to display the buffer details per unit
and mode of allocation. To display the forwarding plane statistics containing
the packet buffer usage per port per stack unit, enter the keywords
buffer
unit
followed by port and the port number (1-56 or all), then buffer-info.
To display the forwarding plane statistics containing the packet buffer
statistics per COS per port, enter the keywords
buffer unit and port (1-56),
and
queue (0-14 or all), and buffer-info.
Buffer unit default: 1
fpga Enter the keyword fpga, to display fpga details.
fru Enter the keyword fru, to display fru details.
phy-firmware-version
Each member of the stack is updated automatically with the latest firmware
while booting as well as during OIR. Enter the keyword
phy-firmware-version, to dump the physical firmware version for stack
units.