Reference Guide

210 | Simple Network Management Protocol (SNMP) and Syslog
www.dell.com | support.dell.com
Related
Commands
logging facility
Configure the Syslog facility, used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
Defaults
local7
Command Modes
CONFIGURATION
Command
History
Related
Commands
clear logging Clears the logging buffer.
logging hostname Returns the logging console parameters to the default setting.
show logging Displays the logging settings and system messages in the internal buffer.
facility-type
(OPTIONAL) Enter one of the following parameters.
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
• sys10 (system use)
• sys11 (system use)
• sys12 (system use)
• sys13 (system use)
• sys14 (system use)
• syslog (Syslog process)
• user (user process)
• uucp (Unix to Unix copy process)
The default is local7.
Version 8.3.17.0 Supported on M I/O Aggregator
logging
hostname
Enables logging to a Syslog server.
logging on Enables logging.