Reference Guide

IPv4 Routing | 167
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 12-8. show ip cam stack-unit Command Example
show ip interface
View IP-related information on all interfaces.
Syntax
show ip interface [interface | brief] [configuration]
member-info Enter the keyword member-info to display the group index used by the ecmp, the
number of egress ports (members) for the ecmp, and the port details of each member.
The detail information under
member-info will give the MAC address, VLAN
ID and gateway of every member port of the ecmp.
summary (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and
the total number routes which can be entered in to CAM.
Version 8.3.17.0 Supported on M I/O Aggregator
Table 12-4. show ip cam Command Example Fields
Field Description
Destination Displays the destination route of the index.
CG Displays 0.
V Displays a 1 if the entry is valid and a 0 otherwise.
C Displays the CPU bit.
1 indicates that a packet hitting this entry is forwarded to the control processor, depending
on Egress port.
V Id Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN.
Mac Addr Displays the next-hop router’s MAC address.
Port Displays the egress interface. Use the second half of the entry to determine the interface.
For example, in the entry 17cl CP, the CP is the pertinent portion.
CP = control processor
Fo= 40 Gigabit Ethernet interface
Te = 10 Gigabit Ethernet interface
FTOS#show ip multicast-cam stack-unit 0 port-set 0 10.10.10.10/32
longer-prefixes
Destination EC CG V C VId Mac-Addr Port
----------------- -- -- - - ----- ----------------- -------------
10.10.10.10 0 0 1 1 0 00:00:00:00:00:00 3f01 CP
FTOS#