Reference Guide

164 | IPv4 Routing
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Command
History
Example
Figure 12-4. show arp Command Example (Partial)
interface interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For the Management interface, enter the keyword
managementethernet
followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.
ip ip-address mask (OPTIONAL) Enter the keyword ip followed by an IP address in the dotted
decimal format. Enter the optional IP address mask in the slash prefix format (/
x).
macaddress
mac-address mask
(OPTIONAL) Enter the keyword macaddress followed by a MAC address in
nn:nn:nn:nn:nn:nn format. Enter the optional MAC address mask in
nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to view entries entered manually.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of ARP entries.
retries
(OPTIONAL) Enter the keyword summary to view the number of ARP retries
before a 20 sec back off.
inspection (OPTIONAL) Enter the keyword inspection to view dynamic ARP Inspection
details.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS>show arp
Protocol Address Age(min) Hardware Address Interface VLAN CPU
---------------------------------------------------------------------------------
--------
Internet 10.11.8.6 167 00:01:e9:45:00:03 Ma 0/0 - CP
Internet 10.11.68.14 124 00:01:e9:45:00:03 Ma 0/0 - CP
Internet 10.11.209.254 0 00:01:e9:45:00:03 Ma 0/0 - CP